MONATEC PARQUET FILLER PF 4000 is an economical Sealer suitable for INTERIOR sealing and filling of gain in parquet floorings. It has very good filing, fast drying and easy-sanding properties which makes this lacquer the best after base-coat for pre-application of topcoats such as air-drying polyurethane, nitrocellulose and co-component arnino/alkyd lacquers.
|Volume Solids||:||30±2 %|
|Flash Points||:||Below 22 ºC|
|Shelf Life||:||15 months in sealed containers|
Recommendation for Use
|Application Method||:||Trowel or brushing|
|Coverage||:||15-20 square meters per liter depending on application method|
|Drying TIime||:||30-40 Minutes|
Direction for Use
When you using the MONATEC PARQUET FILLER PF 4000 if you think the MONATEC PARQUET FILLER PF 4000 is over to dissolve , you can pour a little bit tinner into MONATEC PARQUET FILLER PF 4000 about 5 %-10% only. If you select tinner must be using strong tinner . Before pour a lacquer onto a section of the flooring measured removed all dust and loose materials from timber. In the case of number to apply coats up to your timber. Example: merbau timber apply minimum 4 coats , teak wood timber apply 3-4 coats , kempas timber apply 4-5 coats . Such a difference.
MONATEC PARQUET FILLER PF 4000 cannot be using when air temperature is below 28°C , because can become different white colour on the timber. So that , is better avoid applying when relative humidity is above 30°C.
Our information is based on laboratory tests and practical experience and may as such be considered a guide in connection with choice of product and working method. As the users working condition is beyond our control, we do not assume any responsibility for the result. Our responsibility covers exclusively personal injury or damage to property, which actually have been proved subsequent to faults and defects in one of the products manufactured by us.